Hierarchical nanostructures have attracted considerable research attention due to their applications in the catalysis field. Herein, we design a versatile hierarchical nanostructure composed of NiMoO4 nanorods surrounded by active MoS₂ nanosheets on an interconnected nickel foam substrate. The as-prepared nanostructure exhibits excellent oxygen evolution reaction performance, producing a current density of 10 mA cm⁻² at an overpotential of 90 mV, in comparison with 220 mV necessary to reach a similar current density for NiMoO₄. This behavior originates from the structural/morphological properties of the MoS₂ nanosheets, which present numerous surface-active sites and allow good contact with the electrolyte. Besides, the structures can effectively store charges, due to their unique branched network providing accessible active surface area, which facilitates intermediates adsorptions. Particularly, NiMoO₄/MoS₂ shows a charge capacity of 358 mAhg⁻¹ at a current of 0.5 A g⁻¹ (230 mAhg⁻¹ for NiMoO₄), thus suggesting promising applications for charge-storing devices.

Herein, we propose for the first time visible light photodetector based on n-type ZnO nanorods decorated with p-type Co₃O₄ nanowires. The heterojunction was fabricated on fluorine doped tin oxide (FTO) glass substrate by low temperature aqueous chemical growth method. ZnO exhibits nanorod morphology and cobalt oxide possesses nanowire shape with sharp tail. Energy dispersive spectroscopy confirmed the presence of Zn, O, and Co elements in the heterojunction. ZnO and Co₃O₄ have hexagonal and cubic phases, respectively, as confirmed by XRD. The dense and perpendicular ZnO nanorods are acting as a scattering layer for visible light, while Co₃O₄ nanowires act as a visible-light absorber. The all oxide p–n junction can operate as visible light photodetector. Furthermore, the heterojunction also shows a reproducible and fast response for the detection of visible light. Optimization of the device is needed (presence of buffer layers, tuning a thickness of the optical absorber) to improve its functionalities. 

Nickel oxide (NiO) nanostructures are employed in the basic medium for the oxidation of ethanol. A variety of NiO nanostructures are synthesized by wet chemical growth method, using different hydroxide (OH−) ion sources, particularly from ammonia, hexamethylenetetramine, urea and sodium hydroxide. The use of urea as (OH−) ion source results in flower‐like NiO structures composed by extremely thin nanowalls (thickness lower than 10 nm,), which demonstrated to be the most active for ethanol oxidation. All the samples exhibit NiO cubic phase, and no other impurity was detected. The cyclic voltammetry (CV) curves of NiO nanostructures were found linear over the concentration range 0.1–3.5 mM (R2=0.99) of ethanol, with the limit of detection estimated to be 0.013 mM for ethanol. The NiO nanostructures exhibit a selective signal towards ethanol oxidation in the presence of different members of alcohol family. The proposed NiO nanostructures showed a significant practicality for the reproducible and sensitive determination of ethanol from brandy, whisky, mixture of brandy and rum, and vodka samples. The nanomaterial was used as a surface modifying agent for the glassy carbon electrode and it showed a stable electro‐oxidation activity for the ethanol for 16 days. These findings indicate that the presented NiO nanomaterial can be applied in place of noble metals for ethanol sensing and other environmental applications (like fuel cells).

As a large-area solar radiation collector, luminescent solar concentrators (LSCs) can be used as power generation units in semitransparent solar windows, modernized agricultural greenhouses and building facades. However, the external optical efficiency and long-term stability of the LSCs limit their practical applications due to the sensitivity of the emitters to the light and environmental conditions. Here, we used the concept of “laminated glass” to prepare LSCs, which consist of two waveguide layers and the quantum dots (QDs)/polymer interlayer, and we tune the refractive index of the different parts of the system to improve the external optical efficiency and stability of the LSCs, simultaneously. The waveguide layer can be glass, quartz, polymethyl methacrylate (PMMA) and other transparent materials. The CdSe/CdS core/shell QDs were used as fluorophores to prepare the interlayer of the LSCs. The external optical efficiency of the laminated LSCs is associated with the refractive index of the three layers: the closer the refractive index, the higher the ηopt. The highest external optical efficiency of 3.4% has been achieved for the laminated PMMA/QDs-polymer/PMMA LSCs, which improved ~92% compared to the single-layered CdSe/CdS based LSCs. To the best of our knowledge, this is the highest efficiency for the LSCs based on CdSe/CdS QDs. These results pave the way to realize high efficiency laminated windows as power generation units by suitably tuning the structure of the LSC, and provide the theoretical guidance for the LSCs utilized in building integrated photovoltaics.

We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo₂O₄) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 μM) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo₂O₄ nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo₂O₄ nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo₂O₄ nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co₃O₄. The GCE-modified electrode is highly sensitive towards urea, with a linear response (R² = 0.99) over the concentration range 0.01–5 mM and with a detection limit of 1.0 μM. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.

A facile and efficient electrochemical sensing platform has been successfully exploited for the first time for the determination of lactic acid using a nickel oxide (NiO) nanoparticle-modified glassy carbon electrode (GCE). Nickel oxide nanoparticles were prepared by a chemical growth method using different quantities of arginine as a soft template. The structural and morphological properties of NiO nanoparticles were characterized by Raman spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Cyclic voltammetry (CV) was used to study the electrochemical properties of various samples. The modified electrode is highly sensitive and presents a linear response over a wide range (0.005–5 mM) of lactic acid concentrations in 0.1 M NaOH. The detection limit for the sensor was found to be 5.7 μM, and it exhibits good stability. Furthermore, the sensor shows excellent selectivity in the presence of common interfering species. The lactic acid sensor showed good viability for lactic acid analysis in real samples (milk, yogurt and red wine) and demonstrated significant advancement in sensor technology for practical applications.

Hydrogen production as alternative energy source is still a challenge due to the lack of efficient and inexpensive catalysts, alternative to platinum. Thus, stable, earth abundant, and inexpensive catalysts are of prime need for hydrogen production via hydrogen evolution reaction (HER). Herein, we present an efficient and stable electrocatalyst composed of earth abundant TiO2 nanorods decorated with molybdenum disulfide thin nanosheets, a few nanometers thick. We grew rutile TiO2 nanorods via the hydrothermal method on conducting glass substrate, and then we nucleated the molybdenum disulfide nanosheets as the top layer. This composite possesses excellent hydrogen evolution activity in both acidic and alkaline media at considerably low overpotentials (350 mV and 700 mV in acidic and alkaline media, respectively) and small Tafel slopes (48 and 60 mV/dec in acidic and alkaline conditions, respectively), which are better than several transition metal dichalcogenides, such as pure molybdenum disulfide and cobalt diselenide. A good stability in acidic and alkaline media is reported here for the new MoS2/TiO2 electrocatalyst. These results demonstrate the potential of composite electrocatalysts for HER based on earth abundant, cost-effective, and environmentally friendly materials, which can also be of interest for a broader range of scalable applications in renewable energies, such as lithium sulfur batteries, solar cells, and fuel cells.

Hydrogen evolution reaction through electrolysis holds great potential as a clean, renewable, and sustainable energy source. Platinum-based catalysts are the most efficient to catalyze and convert water into molecular hydrogen; however, their large-scale application is prevented by scarcity and cost of Pt. In this work, we propose a new ternary composite of Ag2S, MoS2, and reduced graphene oxide (RGO) flakes via a one-pot synthesis. The RGO support assists the growth of two-dimensional MoS2 nanosheets partially covered by silver sulfides as revealed by high-resolution transmission electron microscopy. Compared with the bare MoS2 and MoS2/RGO, the Ag2S/MoS2 anchored on the RGO surface (the ternary system Ag2S/MoS2/RGO) demonstrated a high catalytic activity toward hydrogen evolution reaction (HER). Its superior electrochemical activity toward HER is evidenced by the positively shifted (−190 mV vs reversible hydrogen electrode (RHE)) overpotential at a current density of −10 mA/cm2 and a small Tafel slope (56 mV/dec) compared with a bare and binary system. The Ag2S/MoS2/RGO ternary catalyst at an overpotential of −200 mV demonstrated a turnover frequency equal to 0.38 s–1. Electrochemical impedance spectroscopy was applied to understand the charge-transfer resistance; the ternary sample shows a very small charge-transfer resistance (98 Ω) at −155 mV vs RHE. Such a large improvement can be attributed to the synergistic effect resulting from the enhanced active site density of both sulfides and to the improved electrical conductivity at the interfaces between MoS2 and Ag2S. This ternary catalyst opens up further optimization strategies to design a stable and cheap catalyst for hydrogen evolution reaction, which holds great promise for the development of a clean energy landscape.

Overall water splitting represents one of the most promising approaches toward solar energy conversion and storage, which is, however, severely challenged by the four-electron/four-proton nature of the oxygen evolution reaction (OER). One option to overcome this issue is to replace OER with a more useful reaction, for simultaneous production of both hydrogen and chemicals of interest. For the purpose, in this paper a cheap, hydrothermally prepared Ti-doped nanostructured hematite photoanode was employed for the first time as highly stable, heterogeneous catalyst for the low bias, efficient and highly selective photoinduced oxidation of benzylamine to N-benzylidenebenzylamine, and for the simultaneous production of hydrogen in a double solvent/environment cell. A preliminary estimate indicates the possibility to obtain a ∼150 μmol h⁻¹ H₂ production, with the contemporary production of stoichiometric benzylidene N-benzylamine in a 5 × 5 cm² area electrode. This study contributes to overcome the 40-year lasting issues limiting the use of hematite in industrial photoelectrochemical sunlight conversion and storage, due to poor performance of hematite and lack of economic value of oxygen production, providing solid evidence for the simultaneous use of hematite in hydrogen production and alternative oxidation reactions of industrial importance.

Luminescent solar concentrators (LSCs) have received significant attention because of their low cost, large-area and high efficiency sunlight energy harvesting. Colloidal core/shell quantum dots (QDs) are promising candidates as absorbers/emitters in LSCs. However, due to the limitation of QDs properties and device architectures, LSCs fabricated using QDs still face the challenges of low optical efficiency and limited long-term stability for the large-area LSCs. In this work, we synthesized CdSe/CdS QDs, and found that higher CdS shell growth temperature results in improved uniformity in structure and morphology and more suitable optical properties. Based on the CdSe/CdS QDs, a large-area (∼100 cm 2 ) sandwich structure luminescent solar concentrator (LSC) was fabricated. By laminating the QDs layer between two sheets of optical clear glass, the reabsorption losses of the device can be reduced due to the decrease of photon escape. The as-fabricated sandwich structure device exhibits an external optical efficiency of ∼ 2.95% under natural sunlight illumination, which represents a 78% enhancement in efficiency over the single layer film LSCs based on CdSe/CdS QDs. More importantly, the sandwich structure can protect the QDs interlayer from the impact of the ambient environment (e.g. oxygen, moisture and alkalinity) and enhance the long-term stability of LSCs. Our work shows that the use of suitably tuned core-shell QDs and the sandwich structure in LSC architecture can dramatically enhance the external optical efficiency of LSC devices based on CdSe/CdS QDs.