Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Characterization of The Rotating Vortex Rope Pressure Oscillations in a Kaplan Model Turbine Draft Tube
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Strömningslära och experimentell mekanik.ORCID-id: 0009-0004-2676-3839
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Strömningslära och experimentell mekanik.ORCID-id: 0000-0002-3349-601x
Hydraulic Machinery Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 11155-4563, Iran.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Strömningslära och experimentell mekanik.ORCID-id: 0000-0001-7599-0895
2023 (Engelska)Ingår i: International Journal of Fluid Machinery and Systems, ISSN 1882-9554, Vol. 16, nr 2, s. 204-218Artikel i tidskrift (Refereegranskat) Published
Ort, förlag, år, upplaga, sidor
Korean Society for Fluid Machinery , 2023. Vol. 16, nr 2, s. 204-218
Nationell ämneskategori
Strömningsmekanik och akustik
Forskningsämne
Strömningslära
Identifikatorer
URN: urn:nbn:se:ltu:diva-103336DOI: 10.5293/ijfms.2023.16.2.204OAI: oai:DiVA.org:ltu-103336DiVA, id: diva2:1820431
Anmärkning

Godkänd;2024;Nivå 0;2024-01-01 (hanlid);

Tillgänglig från: 2023-12-18 Skapad: 2023-12-18 Senast uppdaterad: 2024-05-08Bibliografiskt granskad
Ingår i avhandling
1. Experimental Investigation and Mitigation of Part-load Pressure Pulsations in Hydro Turbines Using Solid-body Protrusion inside the Draft Tube
Öppna denna publikation i ny flik eller fönster >>Experimental Investigation and Mitigation of Part-load Pressure Pulsations in Hydro Turbines Using Solid-body Protrusion inside the Draft Tube
2024 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

The global demand for electricity generation has been increasing over the recent decades and is expected to grow steadily. Therefore, activating new energy sources to improve the present capacity of electricity production is inevitable. In addition, the reduction of greenhouse gas emissions is another growing concern that is increasingly promoted. Consequently, the integration of clean sources of energy into the electrical grid is a necessity. Renewable energy sources such as wind and solar appear as practical and easy-to-harvest solutions that are clean and sustainable. Thus, their penetration into the electrical grid is both encouraged and pursued on a global scale. However, these sources are intermittent and have a slow regulation response, and an electric network predominantly comprising such sources faces challenges in adapting to the market’s fluctuating demand. As a result, a rapid-response auxiliary source is required in such networks to balance the grid output and guarantee a stable supply of electricity. Hydropower is an ideal and clean alternative that can adopt this regulation role due to its short response time. The shift in hydropower implementation towards this new role requires a broader range of operations with more frequent transitions between the design and off-design conditions. However, current hydro turbines are designed to operate at a limited range of the highest efficiency, termed the best efficiency point (BEP). When operating away from the BEP, hydro turbines confront adverse flow-induced phenomena such as vortex breakdown that can induce pressure pulsations and periodic loadings. These oscillations can cause power swings and aggravated wear rates on turbine compartments through increased fatigue. Part-load (PL) turbine operation is a condition where the precession of a rotating vortex rope (RVR) in the turbine diffuser induces harmful oscillations. With prolonged turbine PL operations, these machines are expected to face a shortened life span and increased repair cycles. Therefore, the need for practical flow control methods to reduce the pressure pulsations under PL is growing.

The present thesis aims to introduce and investigate the concept of protrusion-based methods to mitigate PL pressure pulsations. The latter is attempted by perturbing the flow in the turbine with the radial insertion of solid bodies into the draft tube. The proposed geometries include cylindrical rods and flat plates. The impact of cylindrical rods has been examined on multiple scales of axial turbines, including a downscaled model turbine, a model turbine, and a prototype. These effects were observed with different measurement tools depending on the investigated turbine. The obtained resultspresented in this work for rod protrusion experiments include turbine operation parameters, timeresolved pressure data, strain data, flow visualization, and efficiency. As an improvement to the rod protrusion concept, the flat plates were tested on the downscaled model turbine. The results from these measurements consist of turbine operation parameters, time-resolved pressure data from the draft tube and vaneless space, and efficiency.

Investigated under different PL conditions, the rods could effectively mitigate the RVR-induced pressure pulsations at upper and lower PL conditions. The obtained mitigation rates under these conditions reached as high as 80%. In addition, this method proved effective in reducing flow induced fatigue at lower PL and even speed-no-load (SNL) conditions. However, rod protrusion entailed mixed results under the PL conditions where the RVR induced the strongest periodic oscillations. Moreover, the rods caused a maximum efficiency drop of approximately 3% of the BEP efficiency. More importantly, for all the investigated scales, under the conditions where the rods appeared effective, an optimum protrusion length was found where the most significant mitigation occurred. On the other hand, the investigation of plates on the downscaled model showed complete mitigation of the RVR-induced pressure pulsations under the entire turbine PL range, and the turbine efficiency was even improved under lower PL conditions.

The investigation of both protrusion-based methods verified the need for an adjustable mitigation technique that can adapt to variable flow conditions under different PL ranges. Protrusion-based flow control systems can be incorporated as a new degree of freedom in the existing turbines and modify their operational maps. Thus, depending on the turbine operating condition, the solid bodies can be protruded at a given length or retracted completely to reduce the flow-induced adverse effects with marginal efficiency penalties. Hence, the turbine can operate at an extended range with fewer consequences, which will be a key requirement for hydropower in the future.

Ort, förlag, år, upplaga, sidor
Luleå: Luleå University of Technology, 2024
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Nationell ämneskategori
Strömningsmekanik och akustik
Forskningsämne
Strömningslära
Identifikatorer
urn:nbn:se:ltu:diva-105417 (URN)978-91-8048-572-2 (ISBN)978-91-8048-573-9 (ISBN)
Disputation
2024-06-18, E632, Luleå University of Technology, Luleå, 09:00 (Engelska)
Opponent
Handledare
Tillgänglig från: 2024-05-08 Skapad: 2024-05-08 Senast uppdaterad: 2024-05-28Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Person

Shiraghaee, ShahabSundström, JoelCervantes, Michel J.

Sök vidare i DiVA

Av författaren/redaktören
Shiraghaee, ShahabSundström, JoelCervantes, Michel J.
Av organisationen
Strömningslära och experimentell mekanik
Strömningsmekanik och akustik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 81 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf