A fracture mechanics approach to develop high crash resistant microstructures by press hardeningShow others and affiliations
2017 (English)In: 6th International Conference Hot Sheet Metal Forming of High-Performance Steel CHS2: June 4-7 2017, Atlanta, Georgia, USA : Proceedings / [ed] Mats Oldenburg; Braham Prakash; Kurt Steinhoff, Warrendale, PA: Association for Iron & Steel Technology, AIST , 2017, p. 101-107Conference paper, Published paper (Refereed)
Abstract [en]
Crashworthiness is a relevant engineering property for car parts. However it is not easy to measure at laboratory scale and complex impact tests have to be carried out to determine it. Crash resistance for high strength steel is commonly evaluated in terms of cracking pattern and energy absorption in crashed specimens. Accordingly, the material resistance to crack propagation, i.e. the fracture toughness, could be used to rank crashworthiness. It has been proved in a previous work by the authors, so the measure of fracture toughness, in the frame of fracture mechanics in small laboratory specimens, would allow determining the best microstructure for crash resistance parts. Press hardening offers the possibility to obtain a wide range of microstructural configurations, with different mechanical properties. So the aim of this work is to evaluate the fracture toughness following the essential work of fracture methodology for ferrite-pearlite, bainite, ferrite-bainite, martensite and martensite-bainite microstructures. Results showed that bainitic microstructures have high fracture toughness, similar to TWIP and CP steels, which allows pointing them as potential candidates for obtaining high crash resistance in parts manufactured by press hardening.
Place, publisher, year, edition, pages
Warrendale, PA: Association for Iron & Steel Technology, AIST , 2017. p. 101-107
Series
CHS2-series ; 6
National Category
Other Mechanical Engineering Applied Mechanics
Research subject
Solid Mechanics
Identifiers
URN: urn:nbn:se:ltu:diva-64054ISI: 000505637800010Scopus ID: 2-s2.0-85054261570ISBN: 978-1-935117-66-7 (print)OAI: oai:DiVA.org:ltu-64054DiVA, id: diva2:1110098
Conference
6th International Conference Hot Sheet Metal Forming of High-Performance Steel CHS2, Atlanta, Georgia, USA, 4-7 June 2017
2017-06-152017-06-152026-02-12Bibliographically approved