Corrosion and wear pose significant challenges to equipment operating in harsh environments. Thus, protective coatings are needed. Anti-corrosion and anti-wear coatings are traditionally fossil-based and often contain environmentally harmful additives. Achieving anti-corrosion and anti-wear coatings based on environmentally benign and sustainable materials is important and a significant challenge. This work focused on the development of organosolv lignin-based polyurethane (OS_lignin-PU) coatings. The coatings were synthesised and evaluated for corrosion protection using electrochemical impedance spectroscopy (EIS) and for wear properties using nanoindentation and nano scratch measurements. EIS revealed that the optimal lignin content for corrosion protection purposes in the OS_lignin-PU coatings was 15 wt%. Moreover, addition of 15 wt% lignin to the OS_lignin-PU coatings also enhanced their wear resistance, as evidenced by reduced thickness loss during tribometer tests. The nano scratch measurements revealed that OS_lignin-PU coatings containing 15 wt% lignin exhibited the lowest scratch depth and friction coefficient. It is found that the developed lignin-containing coating exhibits remarkable corrosion and wear resistance, making it a promising sustainable material in various applications for pursuing sustainable development.

Anti-corrosion and anti-wear coatings provide an effective solution. However, traditional coatings are often fossil-based and contain heavy metals, posing environmental concerns. The drive for eco-friendly coatings has led to the exploration of green materials. This study combined lignin, an abundant organic material, and polydimethylsiloxane (PDMS), a known hydrophobic material, to address the challenges. Organosolv lignin was functionalised with (3-Aminopropyl)triethoxysilane (APTES), then chemically grafted on PDMS for the final coating synthesis. The optimised coating achieved through an eco-friendly process, exhibiting enhanced hydrophobicity and barrier properties, showing excellent long-term corrosion resistance in NaCl solution. The optimal coating formulation contained 15 wt% lignin and 40 wt% PDMS, demonstrating a high corrosion resistance (measured impedance of 1010 Ω·cm2), which remains effective even after 3 weeks of immersion in 1 M NaCl solution. This coating also showed good wear resistance, with a low friction coefficient evident from nano scratch tests.

Corrosion causes significant challenges in industrial settings, leading to economic losses and safety concerns. Previously, we developed a lignin-polydimethylsiloxane (lignin-PDMS) coating that exhibited high corrosion resistance. However, the adhesion of the developed lignin-PDMS coating to carbon steel was limited, affecting its overall performance. To address this, we incorporated dopamine (DOPA), known for its strong adhesive properties, as a pre-treatment before applying the coating. It was found that the adhesion and corrosion resistance of lignin-PDMS coated steel could be improved by adjusting the pH value of the DOPA solution. The steel treated with pH 4.5 DOPA solution showed two times higher adhesion strength to the coating than non-treated steel. After the DOPA treatment, the coating can maintain high barrier property for at least 3 months in 1 M NaCl solution, which is even better than commercial gelcoat, demonstrating super corrosion protection. Quartz Crystal Microbalance with Dissipation (QCM-D) and X-ray Photoelectron Spectroscopy (XPS) analyses confirmed the DOPA deposition on the steel surface. Our findings show that the DOPA-lignin-PDMS system is an environmentally friendly and efficient solution for enhancing the durability of steels in corrosive environments.

Various more or less wear-resistant coatings have been developed and used to protect metal substrates. However, the damage caused by wear is still a problem for most coatings. It is of great importance to monitor the wear of coatings in real-time during the applications. Recently reported wear monitoring methods (image processing, luminescent layers and the use of a sensing underlayer) require complex external equipment or additional coating preparation process steps, which limit their applications. As an emerging technology, a triboelectric nanogenerator (TENG) can convert mechanical energy into electricity, and it has been applied as a self-powered sensor. In this study, a new coating wear monitoring method is developed based on a solid-liquid TENG. The developed TENG generates electric signals corresponding to different wear states, which facilitates easy monitoring of the coating’s wear conditions. The results show that the surface composition change caused by wear is the main reason affecting the TENG signal output. The coating-liquid contact-separation motion generates real-time output signals that directly reflect the coating wear states without the need of any additional equipment. This study provides a promising new technology for in-situ coating wear monitoring.