One of the tribological requirements on engine bearing material is its ability to safely embed contaminant particles onto its surface and minimise damage to both the bearing and crankshaft surfaces. In this work, a journal bearing test rig that operates under constant load has been employed to investigate the embeddability behaviour of selected multi-layered Pb-free engine bearing materials at three different rotational speeds using engine oil contaminated with SiC particles. Experimental results have shown that third-body abrasive wear is influenced by the lubricant film thickness. There was also difference in embeddability of the different materials. Bismuth-based overlay and MoS2 containing polyamide-imide-based overlay-coated materials show higher wear compared to tin-based overlay and a polyamide-imide-based composite overlay-coated material. Steel counter surfaces sliding against bismuth-based overlay and MoS2 containing polyamide-imide-based overlay exhibited higher wear than those sliding against tin-based overlay and polyamide-imide-based composite overlay.