Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Impact of laser beam oscillation strategies on surface treatment of microalloyed steel
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development.ORCID iD: 0000-0002-3060-5831
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development.ORCID iD: 0000-0003-0194-9018
2020 (English)In: Journal of laser applications, ISSN 1042-346X, E-ISSN 1938-1387, Vol. 32, no 4, article id 042006Article in journal (Refereed) Published
Abstract [en]

The depth homogeneity of laser-treated zones is one possible factor to define the quality and efficacy of altered mechanical properties in materials. For instance, half-rounded cross-sectional shapes of laser hardened zones using Gaussian beams provide dissimilar hardened depth in the edges and center of the treated area. This means that the in-depth distribution of compressive residual stress varies between the edges and the center of the hardened area. Nonhomogeneity of compressive residual stress distributions can inhibit fatigue properties and can lead to product failure. The utilization of oscillated laser beams has been proven to improve the welding efficiency and energy input distribution to the material, which promises achieving a homogeneous depth of laser-treated zones in hardening applications. Therefore, this work examines the influence of triangular, square, and circular beam oscillation strategies on the energy input distribution during the process and the geometry of the laser-treated zones on microalloyed steel. Laser beam pathways were assembled using a vector graphic editor to visualize the energy distribution from each oscillation strategy. Cross section images of the hardened tracks were taken and related to the thermal energy input profiles. It was revealed that each oscillation strategy demonstrates characteristic temporal and spatial thermal energy input distribution, influencing the geometry of the hardened zone. The circular oscillation strategy produced a widely constant depth in contrary to the triangular and square beam oscillation due to its characteristic energy distribution that allows homogeneous heat dissemination in the material. This confirms that the laser beam oscillation strategy can tailor the energy input distribution to optimize the processing outcome.

Place, publisher, year, edition, pages
American Institute of Physics (AIP), 2020. Vol. 32, no 4, article id 042006
Keywords [en]
laser beam oscillation, laser beam shaping, laser surface treatment
National Category
Manufacturing, Surface and Joining Technology
Research subject
Manufacturing Systems Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-81182DOI: 10.2351/7.0000196ISI: 000575069100001Scopus ID: 2-s2.0-85092347774OAI: oai:DiVA.org:ltu-81182DiVA, id: diva2:1477470
Note

Validerad;2020;Nivå 2;2020-10-19 (johcin)

Available from: 2020-10-19 Created: 2020-10-19 Last updated: 2025-10-22Bibliographically approved
In thesis
1. Laser-induced phase transformations in microalloyed steels
Open this publication in new window or tab >>Laser-induced phase transformations in microalloyed steels
2022 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

The application of thermal cycles below melting temperature can induce solid-to-solid phase transformation in steels, which is the transition between different crystalline structures of the same compound. There are many types of crystalline structures in steels produced, depending on the characteristics of the applied thermal cycle. For instance, rapid cooling can generate martensite structure that tends to increase the hardness of the steels, while slow cooling will more likely produce ferrite structure, which is less hard than the martensite structure. Laser heat treatment is one example where the laser becomes a thermal energy source, inducing thermal cycles below melting point and an extremely rapid cooling rate, which results in unexpected microstructures upon cooling. The mechanism of such phase transformations is still widely unknown, although the knowledge can be beneficial for many laser processes. Accordingly, studies on laser induced phase transformation are necessary.

The purpose of my work is explaining underlying mechanisms of solid-to-solid phase transformation in microalloyed steels due to short thermal cycles of the laser heat treatment. My work aims to (1) find the correlation between energy input distributions from the laser beam and temperature history during the laser heat treatment process and (2) describe how changes in the thermal cycle induced by laser illumination influence the phase transformation dynamics. This work focuses on martensitic transformation and infrared laser (1070 nm).

To explain martensitic transformation during laser heat treatment, this work involved ex-situ observations of the laser heat treated specimens. The study consists of varying the laser parameters, measuring the surface temperature of the specimens and simulating the in-depth temperature. Consecutively, characteristics (i.e., holding time, peak temperature, and cooling rate) of the measured and/or calculated thermal cycles were extracted, and the microstructures of the specimens were observed using microscopes. Finally, the thermal cycle characteristics and the microstructure of the specimens were related.

The results show that the energy input distributions from the laser beam (e.g., laser beam profile) determine the geometry of the treated area, while processing speed and laser power influence the cooling rate and peak temperature of the thermal cycle respectively. The short thermal cycles induced by the laser beam are able to induce martensitic structure in the specimen. However, ferrite structure unexpectedly remains in the treated area. The holding time, which is the duration of temperature staying above austenisation temperature, has an inverse correlation to the appearance of ferrite structure in the treated area. This relates to the carbon diffusion occurring during the process, in which the carbon atoms have to diffuse from rich-carbon-austenite into low-carbon-austenite before cooling. Accordingly, the amount of martensite structure in the treated area depends on the holding time value of the process. There are indications that the rapid cooling induced by the laser beam can abruptly stop the diffusion process. It is clear that the laser provides an opportunity to control martensite structure.

Place, publisher, year, edition, pages
Luleå University of Technology, 2022
Series
Doctoral thesis / Luleå University of Technology, ISSN 1402-1544
National Category
Manufacturing, Surface and Joining Technology Metallurgy and Metallic Materials
Research subject
Manufacturing Systems Engineering
Identifiers
urn:nbn:se:ltu:diva-89434 (URN)978-91-8048-037-6 (ISBN)978-91-8048-038-3 (ISBN)
Public defence
2022-05-25, E231, Luleå tekniska universitet, Luleå, 09:00 (English)
Opponent
Supervisors
Funder
Vinnova
Available from: 2022-03-03 Created: 2022-03-03 Last updated: 2025-10-21Bibliographically approved

Open Access in DiVA

fulltext(2404 kB)517 downloads
File information
File name FULLTEXT01.pdfFile size 2404 kBChecksum SHA-512
57c246f5d42989b32a9a483a354855c4a8288fe4497072f28210761ab322ef607dba23ca81d07ed69c90a0fe54ae1c1d3125efad766644a9ef23316b432a2af8
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopus

Authority records

Dewi, Handika SandraVolpp, Joerg

Search in DiVA

By author/editor
Dewi, Handika SandraVolpp, Joerg
By organisation
Product and Production Development
In the same journal
Journal of laser applications
Manufacturing, Surface and Joining Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 517 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 318 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf