Performance improvement of a lightweight lift tower module
2026 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE credits
Student thesis
Abstract [en]
This thesis is centered around improving the structure of a triangular mast module,this improvement is mainly focused on the stiffness of the mast while reducing the weight. This was done without changing the interface between modules so that the new design can be used together with the current module.These improvements are desired by the owners of the thesis at Alimak Hek AB for three main reasons. If the weight can be reduced enough, it can be kept within regulations for two people to carry a module, when the weight is reduced, less fuel is used when transporting the modules and if the stiffness of the mast is increased, it allows greater freedom in where to place anchors.The CAD software Creo was used to develop many concepts that were compared with the current solution in three simplified load cases, the comparison was performed using Finite Element Analysis (FEA) in the software Ansys. The results from the FEA were then used in a screening and scoring process along with other criteria such as manufacturing difficulty to determine which concept was the best overall. The work followed the product development methodology of Ulrich, Eppinger and Yang.The winning concept then went through several iterations where the final design only uses two unique components, this was done to reduce costs in a possible future production. The concept with this design then went through several iterations where it was optimized for stiffness, weight and accessibility by, for example, changing the angles of the flanges, the general dimensions of the “beams” and moving the panels up and down.The final concept was developed to be manufactured with pressed sheet metal and had a weight reduction of approximately 1 kg while the overall stiffness increased. The rotational stiffness, which was considered the most important single load case,increased by approximately 30% and the stiffness in a composite case with two mast modules and the load from a lift increased by approximately 12%. The concept had manufacturing methods in mind where it should be possible to weld with an automated welding method, and the sheet metal should be able to be pressed.
Place, publisher, year, edition, pages
2026. , p. 74
Keywords [en]
strucural, FEA, mast, hoist, lift, elevator
National Category
Solid and Structural Mechanics
Identifiers
URN: urn:nbn:se:ltu:diva-118931OAI: oai:DiVA.org:ltu-118931DiVA, id: diva2:2082797
External cooperation
Alimak Hek AB
Educational program
Mechanical Engineering, master's level
Examiners
2026-08-272026-07-012026-08-27Bibliographically approved