Primary Separation of Hematite Ore: A Comparative Study of Separation Techniques
2026 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE credits
Student thesis
Abstract [en]
The purpose of this study was to compare three separation techniques, applied to three raw materials for the primary separation of hematite from gangue minerals. The materials characterised and beneficiated were three hematite ores from LKAB deposits in northern Sweden: HAR from Malmberget, GRU from Gruvberget, and PG Hem from Per Geijer. GRU and PG Hem was ground to a P80 of approximately 200 μm, and HAR to approximately 240 μm. The separation techniques studied were gravimetric separation by shaking table, dry high-intensity magnetic separation (DHIMS), and electrical separation by high-tension separation. A design of experiments was carried out to establish optimum operating parameters for DHIMS and high-tension separation while sieve analysis, XRF, and TIMA were used to evaluate the results.
The material characterisation showed that GRU has the highest hematite content at 70.0 wt%, followed by PG Hem at 67.6 wt%, and HAR at 67.0 wt%. In terms of gangue composition, PG Hem contains the most apatite, whereas GRU and HAR contain more K-feldspar. Quartz is a common gangue mineral in all three materials. The liberation analysis showed that 96 wt% of the hematite in HAR was liberated to more than 90 vol%, while the corresponding values for GRU and PG Hem were 88 wt% and 72 wt% respectively. Based on the mineralogical characteristics, gravimetric and magnetic separation were expected to provide the most effective beneficiation for HAR and GRU, whereas all three techniques were expected to perform well for PG Hem.
All three separation techniques concentrated the iron in each of the materials, although gravimetric and magnetic separation were superior to electrical separation. Gravimetric separation was, however, inferior to magnetic separation with respect to phosphorus rejection. The mineralogical study could therefore predict the effectiveness of the separation techniques only in part and did not fully account for their performance.
For further investigation, a combination of primary gravimetric separation, and secondary magnetic separation is recommended for HAR and GRU. For PG Hem, multiple stage magnetic separation is recommended.
Place, publisher, year, edition, pages
2026. , p. 101
Keywords [en]
Hematite, Iron ore beneficiation, Gravimetric separation, Magnetic separation, Electrical separation, Process mineralogy, Design of experiments
National Category
Chemical Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-119512OAI: oai:DiVA.org:ltu-119512DiVA, id: diva2:2095025
External cooperation
LKAB
Subject / course
Student thesis, at least 30 credits
Educational program
Master Programme in Sustainable Process and Chemical Engineering
Supervisors
Examiners
2026-08-262026-08-252026-08-26Bibliographically approved