Progress in the study on the phase equilibria of the CO2-H2O and CO2-H2O-NaCl systemsShow others and affiliations
2007 (English)In: Chinese Journal of Chemical Engineering, ISSN 1004-9541, E-ISSN 2210-321X, Vol. 15, no 3, p. 439-448Article in journal (Refereed) Published
Abstract [en]
To study the feasibility of CO2 geological sequestration, it is needed to understand the complicated multiple-phase equilibrium and the densities of aqueous solution with CO2 and multi-ions under wide geological conditions (273.15-473.15 K, 0-60 MPa), which are also essential for designing separation equipments in chemical or oil-related industries. For this purpose, studies on the relevant phase equilibria and densities are reviewed and analyzed and the method to improve or modify the existing model is suggested in order to obtain more reliable predictions in a wide temperature and pressure range. Besides, three different models (the electrolyte non random two-liquid (ELECNRTL), the electrolyte NRTL combining with Helgeson model (ENRTL-HG), Pitzer activity coefficient model combining with Helgeson model (PITZ-HG)) are used to calculate the vapor-liquid phase equilibrium of CO2-H2O and CO2-H2O-NaCl systems. For CO2-H2O system, the calculation results agree with the experimental data very well at low and medium pressure (0-20 MPa), but there are great discrepancies above 20 MPa. For the water content at 473.15 K, the calculated results agree with the experimental data quite well. For the CO2-H2O-NaCl system, the PITZ-HG model show better results than ELECNRTL and ENRTL-HG models at the NaCl concentration of 0.52 mol•L-1. Bur for the NaCl concentration of 3.997 mol•L-1, using the ELECNRTL and ENRTL-HG models gives better results than using the PITZ-HG model. It is shown that available experimental data and the thermodynamic calculations can satisfy the needs of the calculation of the sequestration capacity in the temperature and pressure range for disposal of CO2 in deep saline aquifers. More experimental data and more accurate thermodynamic calculations are needed in high temperature and pressure ranges (above 398.15 K and 31.5 MPa).
Place, publisher, year, edition, pages
2007. Vol. 15, no 3, p. 439-448
National Category
Energy Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-8572DOI: 10.1016/S1004-9541(07)60105-0ISI: 000247900900022Scopus ID: 2-s2.0-34447249312Local ID: 7165d6c0-0d5e-11de-9d3e-000ea68e967bOAI: oai:DiVA.org:ltu-8572DiVA, id: diva2:981510
Note
Validerad; 2007; 20090310 (xiajix)
2016-09-292016-09-292025-10-21Bibliographically approved