A Novel Sawing Method for Small-Diameter LogShow others and affiliations
2015 (English)In: Wood research, ISSN 1336-4561, Vol. 60, no 2, p. 293-300Article in journal (Refereed) Published
Abstract [en]
The commercial feasibility of sawmilling mainly depends on the expected productionyield. At the same time, the choice of sawing method is one of primary factors affecting yield.Therefore, choosing a reasonable sawing method is also necessary in small-diameter logs sawingprocess. In this study, a novel sawing method was proposed, and a comparison was made betweenthe volume yield for the most common sawing method in China, and the yield produced by anovel sawing method. This study shows that hexagon sawing give higher yield than the othersawing methods. The mean yield for the whole diameter range is: 82.7 % for hexagon sawing,53.3 % for live sawing, 56.7 % for hexagon sawing, 63.2 % for hexagon sawing.
Place, publisher, year, edition, pages
2015. Vol. 60, no 2, p. 293-300
Keywords [en]
Small-diameter log, sawing method, volume yield
National Category
Other Mechanical Engineering
Research subject
Wood Science and Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-9001Scopus ID: 2-s2.0-84937843308Local ID: 78ea04aa-55ed-4a1a-8fac-9646a95e70a1OAI: oai:DiVA.org:ltu-9001DiVA, id: diva2:981939
Note
Validerad; 2015; Nivå 2; 20150129 (matse)
2016-09-292016-09-292025-10-21Bibliographically approved