Our aim has been to produce continuous biofibers and use nanocrystals to improve the properties. Cellulose nanocomposite fibers were prepared by melt spinning of cellulose acetate butyrate (CAB), cellulose nanocrystals (CNCs) and triethyl citrate (TEC) as well as electro spinning of cellulose acetate (CA) and CNCs. Different characterization techniques such as tensile testing, DMA, TGA, SEM and AFM were used to study the properties of the obtained nanocompiste fibers. The results showed that sol-gel technique successfully dispersed CNCs in the CAB matrix, therefore; an improvement in the mechanical properties of the melt spun bionanocomposite fibers were achieved. Likewise, the addition of CNCs into CA matrix generated an improvement in the storage modulus of the random oriented electrospun fibers. Aligned CA- fibers and nanocomposite fibers were successfully electrospun. A tendency to decrease the fiber diameter with the addition of CNCs was found for the both types of electrospun nanocomposite fibers.