The lubricant film thickness in an EHL conjunction has been studied under mixed sliding and rolling conditions using optical interferometry. A hybrid method was developed to combine the experimental study and advanced numerical calculations including a fast algorithm for evaluation of pressure distribution. A multi-channel image analyser was employed to evaluate a 3-D film thickness map. This map was used for calculating pressure distribution by solving the film thickness equation. The influence of sliding on film thickness and its corresponding pressure distribution has been investigated in this paper. The traction force has also measured. The investigations found that at relatively low entrainment velocities the sliding has only a slight influence on the pressure distribution. The characteristic shape of the pressure remains nearly the same for all tested slide/roll ratios. The difference between pressures at various degrees of sliding is seen mostly along the horseshoe shaped constriction. It has also been shown that the lubricant type has influence on the shape of the pressure spike at the outlet.
Godkänd; 1998; 20070220 (cira)